The project is designed to develop a four quadrant
control system for a DC motor. The motor is operated in four quadrants i.e.
clockwise; counter clock-wise, forward brake and reverse brake.
The four quadrant operation of the dc motor is best
suited for industries where motors are used and as per requirement as they can
rotate in clockwise, counter-clockwise and also apply brakes immediately in
both the directions. In case of a specific operation in industrial environment,
the motor needs to be stopped immediately. In such scenario, this proposed
system is very apt as forward brake and reverse brake are its integral
features.
Instantaneous
brake in both the directions happens as a result of applying a reverse voltage
across the running motor for a brief period. 555 timer used in the project develops
required pulses. Push buttons are provided for the operation of the motor which
are interfaced to the circuit that provides an input signal to it and in turn
controls the motor through a driver IC. Optionally speed control feature can be
achieved (but not provided in this project) by push button operation.
This project can be enhanced by using higher power
electronic devices to operate high capacity DC motors. Regenerative braking for
optimizing the power consumption can also be incorporated..
No comments:
Post a Comment