FINGER PRINT BASED DRIVING LICENSE
MANAGEMENT SYSTEM
Technical Specifications:
Title of the project : Finger Print Based Driving License
Management System
Domain : Biometrics & Embedded Design
Software : Embedded C, Keil, Proload
Microcontroller : AT89S52
Power Supply : +5V, 500mA Regulated Power Supply
Display : LED 5mm, 16 X 2 LCD
Biometric Sensor : FIM3030N
Storage Capacity : Up to 100 finger print images
Image
Registration : Through Serial Communication
Applications : Industries, Banks, Office, Library,
colleges
FINGER PRINT BASED DRIVING LICENSE MANAGEMENT SYSTEM.
ABSTRACT:
Driving license
system is a very difficult task for the government to monitor. In this project,
all the citizens images will be scanned and recorded. Whenever a citizen
crosses the traffic rules, the police can scan his image and can collect
penalty / fine from the defaulter. Using this method, the police can track the
history of the driver. This biometric based driving license monitoring system
is very easy and convenient to monitor.
According ancient
Greek scripts BIOMETRICS means study of life. Biometrics studies commonly include
fingerprint, face, iris, voice, signature, and hand geometry recognition and
verification. Many other modalities are in various stages of development and
assessment. Among these available biometric traits Finger Print proves to be
one of the best traits providing good mismatch ratio and also reliable.
Registering the attendances of students has become a hectic work as sometimes
their attendance may be registered or missed. To overcome this problem i.e. to
get the attendances registered perfectly we are taking the help of two
different technologies viz. EMBEDDED SYSTEMS and BIOMETRICS.
Firstly discussing about
Biometrics we are concentrating on Fingerprint scanning. For this we are using
FIM 3030N high voltage module as a scanner. This module has in-built ROM, DSP
and RAM. In this we can store up to 100 users fingerprints. This module can
operate in 2 modes they are Master mode and User mode. We will be using Master
mode to register the fingerprints which will be stored in the ROM present on
the scanner with a unique id.
When this module is interfaced to the
microcontroller, we will be using it in user mode. In this mode we will be
verifying the scanned images with the stored images. When coming to our application
the images of the citizens will be stored in the module with a unique id. Citizens
have to scan their image on demand by police, which is then verified with the
image present in fingerprint module and their record will be updated.
This scanner is interfaced to AT89S52
microcontroller through MAX-232 enabling serial communication. By using this
controller we will be controlling the scanning process. After the scanning has
been completed the result is stored in the microcontroller. By simply pressing
a switch we can get the details of the polling.
This project uses
regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used
for voltage regulation. Bridge type full wave rectifier is used to rectify the
ac out put of secondary of 230/12V step down transformer.
Block Diagram:
Advantages:
- No manual errors
- Need not remember any password
- Need not to carry any card
- Very easy to monitor the track record of the citizen / driver
Scopes for
Advancements:
- GSM modem can be connected to this unit to communicate to remote reporting office
- RTC can be interfaced to record login and logout time.
Applications:
- RTA Offices
- Highway Patrol
- Traffic Signal Junctions
No comments:
Post a Comment